Scooter Compression System HIC / Tighten your HIC

If you’re experiencing that the bar on your scooter is loose, then follow these simple steps down below:

• First and foremost, remove the bar by loosening the clamp. To do so use a hex key.
• Secondly, using the hex key again, firmly tighten the HIC headset at the top of the scooter where the bar was removed from.
• Finally, after the HIC is very firmly tightened, put the bar back on and tighten the clamp firmly using the hex key once again.

Hereafter, your scooter will feel very tight, but that is normal. After a few rides or more your bar will loosen itself properly into place.